Radix Traffic Limited Products
Radix Traffic have developed a range of high quality and cost effective products which are manufactured and tested in the UK.
Rotating Cone Tactile Equipment
There are several different types of traffic light controlled pedestrian crossings used in the UK, and Radix Traffic have developed Tactile Equipment to suit all of them:
- CUTU100 (230v)
- ITE200 (48v)
- ITE220, with remote enable and fault monitor (48v)
- ITE221 (12v)
One of the most pressing issues for local authorities is the high cost of repairing or replacing failed inductive loops used for vehicle detection at signalised junctions.
To provide authorities with a practical and extremely low cost alternative to inductive loops, Radix Traffic have developed an innovative solution comprising a vehicle detector, which is very quickly and easily installed inside ducts located beneath the carriageway, and a Eurocard interface card installed inside the controller cabinet which communicates to and from the detector via legacy or new feeder cable.
Another issue for local authorities is the continuing high cost of their energy consumption and the pressure to reduce the carbon footprint of their traffic system.
Traffic signals currently dim to 25% of their normal (bright) output at night time. With the Radix Traffic photocell however, the signal aspects will also dim during the day when the daytime ambient light levels drop to 10,000 lux or less.
Early trials of the photocell indicate potential energy savings to local authorities
of between 20-
For more detailed information on all of the above products, please simply navigate to the relevant pages using the buttons above. Alternatively if you cannot find the information you are looking for, please contact Radix Traffic on 01794 511388.
Telephone: 01794 511388 Fax: 01794 830143 email: info@radixtraffic.co.uk
